โ RNS 1.4.2 released https://pypi.org/project/rns/
๐ฌค rns.recipes
top
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
โ Support for Heltec T096 in RNode firmware โ
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
Started by nilu96 ยท 3mo ago
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-1
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ nilu96 #1 โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 3mo ago
Hi everyone,
does anyone know if there are plans to add support for the new Heltec T096
([https://heltec.org/project/t096/](url)) to the RNode firmware?
I think the T096 looks very promising because it utilizes the same PA as the V4 but is
based on nrf52 to save power in idle.
Thanks!
โ 0 โ 0 โค 0
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-2
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Nickie #2 โ
โ c28ea15c1b83aaba โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 3mo ago
I have added preliminary support for T096 in my
[repo](https://git.rns.moscow/deuxyeux/RNode_Firmware/commit/ed5f68f3fa20d14722fcc7aec2c1f
8fb031b9ded) and [flasher](https://flasher.rns.moscow/).
Transmission and reception has been tested "on the table" between two Nomadnet instances.
No range testing has been conducted. From the looks of it, the T096 uses the same
front-end as a Heltec V4.3.
There are issues with screen flickering on refresh that I haven't been able to fix. Maybe
someone more experienced can take a look.
I also haven't looked into the PMU yet.
โ 0 โ 0 โค 1
โโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโ
post-3
โญโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฎ
โ Nickie #3 โ
โ c28ea15c1b83aaba โ
โฐโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโโฏ
โธ 1mo ago
Nickie wrote:
> I have added preliminary support for T096 in my
[repo](https://git.rns.moscow/deuxyeux/RNode_Firmware/commit/ed5f68f3fa20d14722fcc7aec2c1f
8fb031b9ded) and [flasher](https://flasher.rns.moscow/).
>
> Transmission and reception has been tested "on the table" between two
Nomadnet instances. No range testing has been conducted. From the looks of it, the T096
uses the same front-end as a Heltec V4.3.
>
> There are issues with screen flickering on refresh that I haven't been able to
fix. Maybe someone more experienced can take a look.
> I also haven't looked into the PMU yet.
I have updated the firmware for the T096 and now it supports colored elements and uses
the native 160x80 resolution of the panel with additional indication of battery voltage
and TX/RX boxes on the display. It is now my daily-driver RNode.
โ 0 โ 0 โค 1
โ INFO โ Identify to this node to post. How?
bottom